Custom kydex sheath made for the Sheffield Fairbairn sykes commando dagger. 

PLEASE READ

Please be sure you have this particular knife.

TIP : Because the knife has "loose" parts that are tightened by a Pommel Nut, Alignment can be different with each knife, which means fitment could be off slightly.  To be sure the sheath fits properly please be sure to check that the guard, blade and handle alignment is straight and centered. Since the handle and guard do not always line up straight from the factory it is very easy to correct the issue for a nice fitting sheath. When I make the sheaths I make sure all of the knife hardware is aligned and tightened prior to pressing the sheath into its final shape. The easiest way I have found to align the hardware is to loosen the nut so the parts can move freely, install into the new sheath so your parts can settle in the impressions made by my knife and tighten the pommel nut. Each knife may vary so you might have to do a little bit of extra adjusting of your hardware outside of the sheath. However 99% of the knives out there are lined up properly, but sometimes there are knives that leave the factory off center hardware that needs to be realigned. I just go the extra mile to be sure everything is perfectly centered.

KYDEX SHEATH : PANCAKE STYLE. 

A CLASSIC KNIFE WITH MODERN FUNCTIONALITY.

Color of your choice

Kydex is. 093 thick

Assembled with long barrel eyelets for added assembly strength and thicker flange to better match the "finished" side. If turning the sheath over, the "back" of the sheath will look like the "front" side.

Drain system is at the very tip of the sheath. 

LEATHER SCOUT STRAPS MADE WITH 10 OZ VEG TANNED PREMIUM COWHIDE LEATHER. I CUT AND DYE THE STRAPS FOR EACH SHEATH. STRAPS ARE UNIQUE TO EACH SHEATH. SNAPS ARE HIGH QUALITY DIRECTIONAL SNAPS "PULL THE DOTS" BRAND , THE BEST ON THE MARKET!

Ambidextrous sheath with the ability to remount the attachments on either side for left or right hand carry. (Note: Only Taco style sheaths require a left or right hand Dangler version.  Otherwise all attachments can be flipped over either side for left or right hand carry)

Eyelets are 3/4" center to center space and have 1/4" diameter holes to accept most aftermarket and Mil-Spec attachments such as tek-lok, Molle-lok, Malice and any other attachments that have 3/4" spaced attachment holes or 1.5" spaced attachment holes. 

All Armorsheaths sheaths are modular and can build into any style of rig you desire for whatever adventure you seek. Add a firesteel holder, and a pouch to complete your rig.

These listings are for the sheath and belt attachment ONLY. Knife NOT included. 

Please allow 1-2 weeks to create your sheath. These are custom made and require time to make. 

PLEASE READ THE FAQ PAGE FOR MORE DETAILS.

Shipping inside the USA is FREE!