You need to choose options for product.
-
products/20230104_173144.jpg
-
products/20230104_173149.jpg
-
products/20230104_173156.jpg
-
products/20230104_173200.jpg
-
products/20230104_173203.jpg
-
products/20230104_173210.jpg
-
products/20230104_173216.jpg
-
products/20230104_173231.jpg
-
products/20230104_173240.jpg
-
products/20230104_173304.jpg
Custom Kydex sheath for the Cold Steel " TAI PAN" Knife. MAKE SURE YOU HAVE THE SAME COLD STEEL TAI PAN THAT IS LISTED.
KYDEX SHEATH ready for any attachment you need.
WHATS INCLUDED: SHEATH ONLY, NO ATTACHMENTS
Color of your choice
Pancake Style Sheath (two rows of eyelets)
Kydex is. 093 thick and assembled with long barrel eyelets for added assembly strength.
Drain system is at the very tip of the sheath.
NOTE FOR PROPER SHEATH FUNCTION! THE TAI PAN "FINGER GUARD" MIGHT HAVE SHARP EDGES THAT MAY GET CAUGHT INSIDE THE SHEATH, NOT ALLOWING THE KNIFE TO DEPLOY. NOT ALL KNIVES HAVE THIS ISSUE BUT SOME HAVE BEEN KNOWN TO HAVE SHARP BURRS OR JUST SHARP EDGES ON THE FINGER GUARD THAT NEEDS TO BE "KNOCKED OFF" WITH A STONE, FILE OR SANDING BLOCK. I RECOMMEND USING A SHARPENING STONE AND JUST WORK OVER THE SHARP CORNERS OF THE FINGER GUARD UNTIL THE SHARP EDGES DO NOT CUT INTO THE KYDEX. USING A STONE WILL REMOVE MINIMAL MATERIAL SLOWLY AND NOT CHANGE THE ASTHETICS OF THE FINGER GUARD. ONCE THE SHARP CORNERS/BURRS ARE REMOVED, "DULLED", THE SHEATH SHOULD FUNCTION THE WAY IT WAS DESIGNED. YOU ARE ONLY TRYING TO SMOOTH OFF THE BURRS AND DULL THE SHARP CORNERS, SO THE GUARD CAN GLIDE THROUGH THE SHEATH AND NOT "HANG UP" BY CUTTING INTO THE KYDEX. REMEMBER YOU ARE NOT TRYING TO BEVEL THE CORNER EDGES OF THE FINGER GUARD, ONLY SMOOTH/DULL...
Solid Retention and "Click" when knife is put away. Retention allows knife to be carried in Horizontal "Scout" Carry or Inverted carry.
No "Snaps, velcro, buttons" to fumble with or wear out, NO moving parts to wear out! Knife deployment is quick with the press of your thumb or a quick pull. This makes access very easy when you only have one hand to deploy the knife. The functionality is ideal for Tactical/Survival use.
Ambidextrous sheath with the ability to remount the attachments on either side for left or right hand carry. (Note: dangler system does require a left or right version on TACO Style Sheaths). Otherwise all attachments can be flipped over either side for left or right hand carry)
Eyelets are 3/4" center to center space and 1/4" diameter holes to accept most aftermarket attachments such as tek-lok, Molle-lok, Malice and any other attachments that have 3/4" spaced attachment holes or 1.5" spaced attachment holes. The Eyelet hole diameter allows the use of Heavy Duty Hardware (Posts, Screws, Chicago Screws, ect..) for a Rock Solid Assembly!
All Armorsheaths sheaths are modular in design. The Sheath is capable of Many Carry Styles and Attachment Configurations. Add a firesteel holder with Firesteel, pouch, compass, flashlight, FirstAid, Fire Starting Kit/Tin, ANYTHING you can fit, including "Piggyback" knife Combinations. l make ANY Attachment you need.
PLEASE READ BELOW AND FAQ PAGE FOR MORE DETAILS
The listings are for the sheath ONLY. Knife NOT included.
Please allow 7-14 days to create your sheath. PLEASE READ FAQ AND MAIN PAGE FOR SHIPPING UPDATES. I DO OCCASIONALLY GET VERY BUSY SO LEAD TIME COULD INCREASE.
These are custom made and require time to make. I do not keep ready made sheaths due to custom upgrades and requests that customers ask for often. I AM a "CUSTOM" Kydex Craftsman, NOT a "FACTORY" that churns out Quantity. My Focus is "One Sheath at a time"... I Work Alone, not depending on someone else to help complete a Sheath, I finish to the last Eyelet with precision.
Shipping inside the USA is FREE!
- Regular price
- $80.00
Custom Kydex sheath for the Cold Steel " TAI PAN" Knife. MAKE SURE YOU HAVE THE SAME COLD STEEL TAI PAN THAT IS LISTED.
KYDEX SHEATH ready for any attachment you need.
WHATS INCLUDED: SHEATH ONLY, NO ATTACHMENTS
Color of your choice
Pancake Style Sheath (two rows of eyelets)
Kydex is. 093 thick and assembled with long barrel eyelets for added assembly strength.
Drain system is at the very tip of the sheath.
NOTE FOR PROPER SHEATH FUNCTION! THE TAI PAN "FINGER GUARD" MIGHT HAVE SHARP EDGES THAT MAY GET CAUGHT INSIDE THE SHEATH, NOT ALLOWING THE KNIFE TO DEPLOY. NOT ALL KNIVES HAVE THIS ISSUE BUT SOME HAVE BEEN KNOWN TO HAVE SHARP BURRS OR JUST SHARP EDGES ON THE FINGER GUARD THAT NEEDS TO BE "KNOCKED OFF" WITH A STONE, FILE OR SANDING BLOCK. I RECOMMEND USING A SHARPENING STONE AND JUST WORK OVER THE SHARP CORNERS OF THE FINGER GUARD UNTIL THE SHARP EDGES DO NOT CUT INTO THE KYDEX. USING A STONE WILL REMOVE MINIMAL MATERIAL SLOWLY AND NOT CHANGE THE ASTHETICS OF THE FINGER GUARD. ONCE THE SHARP CORNERS/BURRS ARE REMOVED, "DULLED", THE SHEATH SHOULD FUNCTION THE WAY IT WAS DESIGNED. YOU ARE ONLY TRYING TO SMOOTH OFF THE BURRS AND DULL THE SHARP CORNERS, SO THE GUARD CAN GLIDE THROUGH THE SHEATH AND NOT "HANG UP" BY CUTTING INTO THE KYDEX. REMEMBER YOU ARE NOT TRYING TO BEVEL THE CORNER EDGES OF THE FINGER GUARD, ONLY SMOOTH/DULL...
Solid Retention and "Click" when knife is put away. Retention allows knife to be carried in Horizontal "Scout" Carry or Inverted carry.
No "Snaps, velcro, buttons" to fumble with or wear out, NO moving parts to wear out! Knife deployment is quick with the press of your thumb or a quick pull. This makes access very easy when you only have one hand to deploy the knife. The functionality is ideal for Tactical/Survival use.
Ambidextrous sheath with the ability to remount the attachments on either side for left or right hand carry. (Note: dangler system does require a left or right version on TACO Style Sheaths). Otherwise all attachments can be flipped over either side for left or right hand carry)
Eyelets are 3/4" center to center space and 1/4" diameter holes to accept most aftermarket attachments such as tek-lok, Molle-lok, Malice and any other attachments that have 3/4" spaced attachment holes or 1.5" spaced attachment holes. The Eyelet hole diameter allows the use of Heavy Duty Hardware (Posts, Screws, Chicago Screws, ect..) for a Rock Solid Assembly!
All Armorsheaths sheaths are modular in design. The Sheath is capable of Many Carry Styles and Attachment Configurations. Add a firesteel holder with Firesteel, pouch, compass, flashlight, FirstAid, Fire Starting Kit/Tin, ANYTHING you can fit, including "Piggyback" knife Combinations. l make ANY Attachment you need.
PLEASE READ BELOW AND FAQ PAGE FOR MORE DETAILS
The listings are for the sheath ONLY. Knife NOT included.
Please allow 7-14 days to create your sheath. PLEASE READ FAQ AND MAIN PAGE FOR SHIPPING UPDATES. I DO OCCASIONALLY GET VERY BUSY SO LEAD TIME COULD INCREASE.
These are custom made and require time to make. I do not keep ready made sheaths due to custom upgrades and requests that customers ask for often. I AM a "CUSTOM" Kydex Craftsman, NOT a "FACTORY" that churns out Quantity. My Focus is "One Sheath at a time"... I Work Alone, not depending on someone else to help complete a Sheath, I finish to the last Eyelet with precision.
Shipping inside the USA is FREE!
- Regular price
- $80.00
Frequently Bought Together
-
Accessory- Kydex BIC lighter holder
Regular price From $28.00 -
Accessory- Kydex Fire Steel Holder
Regular price From $28.00 -
Accessory- Kydex Offset Drop Belt Loop Mini
Regular price From $28.00 -
Accessory- Kydex Offset Drop Clip Large
Regular price $34.00
Similar Products
-
Cold Steel Recon Tanto custom Pancake style Kydex Sheath
Regular price From $66.00 -
Cold steel SRK Kydex sheath, pancake style
Regular price $66.00 -
Cold steel outdoorsman lite custom Taco style Kydex Sheath (sheath only)
Regular price From $66.00 -
Cold steel Pendelton Lite Pancake style Kydex sheath
Regular price From $51.00 -
Cold Steel Tanto Lite Taco Sheath
Regular price From $58.00 -
Cold Steel TANTO LITE Pancake style kydex Sheath
Regular price From $66.00
Add an Attachment
-
Accessory- Kydex Wide Belt Loop
Regular price From $27.00 -
Accessory- Kydex Wide Style 6 hole Belt Loop
Regular price From $27.00 -
Clip style belt attachment 2-way mount, Horizontal or Vertical
Regular price $27.00 -
Kydex 2" belt loop w/ 2 side by side holes (3/4" spacing & no eyelets)
Regular price $18.00
Customer Reviews
Customers also bought
Complementary products
-
ITEM BAR TITLE
Share shipping, delivery, policy information.
-
ITEM BAR TITLE
Share shipping, delivery, policy information.
-
ITEM BAR TITLE
Share shipping, delivery, policy information.
-
ITEM BAR TITLE
Share shipping, delivery, policy information.